SteliosCellar AVR links : Tools : Adapters

Tools : Adapters

You Can Add An Advertisement Here!

Inside SteliosCellar AVR links

Links:

STK - PROTO - 1 - Prototype board for Atmel's STK500. Connects to the STK500 as a daughter board to the EXPAND0 and EXPAND1 connectors. Supports all 10 pin header port connectors of the STK500. Use the 10 pin header when an emulator POD is used with the STK500. When firmware development is completed plug the STK-PROTO-1 into the EXPAND0 and EXPAND1 connectors for a clean looking protoype. Supports JTAG ICE connector for developing with AVR devices that have JTAG on chip debugging. - Added: 27-Aug-2003
Hits : 46 Rating : No Rating (0) Votes : 0 [ Rate It ]

Adapter5800 - Part #5800 is a dual-purpose PC board for adapting most 80-pin, or smaller, QFP or TSOP devices to 0.1 inch header spacing for easy breadboarding. One side supports 0.5mm spacing parts and the other side supports 0.8mm spacing parts. Soldering headers to the appropriate side determines which side to use. Because of the unique design of the board, any device 80 pins or less, can easily be supported. QFP parts will work regardless if each side has an odd or even number of pins. - Added: 27-Aug-2003
Hits : 24 Rating : No Rating (0) Votes : 0 [ Rate It ]

AVR570 - The AVR570 is a 47mm square module holding a surface mounted ATmega128 CPU, and its associated components, eg. the crystal, capacitors, reset generator, ISP programming connector, and an optional 10-pin ICE connector. - Added: 27-Aug-2003
Hits : 32 Rating : No Rating (0) Votes : 0 [ Rate It ]

DIL40 to PLCC - DIP 40 to 44 PLCC adapter, to allow DIP 40 ICE headers to attach to 44 PLCC sockets. Use with ICE200 and Flash designs own Micro-ICE and Easy-ICE. - Added: 27-Aug-2003
Hits : 27 Rating : No Rating (0) Votes : 0 [ Rate It ]

ICE200 SOIC/PLCC/TQFP emulator adapter kit - The ICE 200 Surface Mount Adapter Kit is used together with an ICE 200. It is a low cost solution to in-circuit emulation on designs using SMD versions of the AVR family of microcontrollers. - Added: 27-Aug-2003
Hits : 16 Rating : No Rating (0) Votes : 0 [ Rate It ]

KANMEGDEV - These 64-pin devices are only available in TQFP Surface Mount packages, which make them tricky to use in development. This board provided with standard 0.1 inch pitch headers for mounting them. They can be used on their own or will plug straight into a STK300 board. - Added: 4-Oct-2003
Hits : 22 Rating : No Rating (0) Votes : 0 [ Rate It ]

KANMEGDEV3 - Mega Adapter Board 3v. - Added: 4-Oct-2003
Hits : 15 Rating : No Rating (0) Votes : 0 [ Rate It ]

STK501 - The STK501 board is a top module designed to add ATmega103, ATmega64 and ATmega128 support to the STK500 development board from Atmel Corporation. With this board the STK500 is extended to support all current AVR devices in a single development environment! - Added: 27-Aug-2003
Hits : 26 Rating : No Rating (0) Votes : 0 [ Rate It ]

tinyISP socket - The tinyISP programming socket is a convenient method for connecting an in-system programming (ISP) dongle to an Atmel® tinyAVR® microcontroller in a prototype circuit. The tinyISP simply extends the appropriate signals from the chip to the standard 10 pin ISP header. - Added: 27-Aug-2003
Hits : 23 Rating : No Rating (0) Votes : 0 [ Rate It ]