You Can Add An Advertisement Here!
| Inside SteliosCellar AVR links
|
|
|
Links:
-
AVR/8051 uInternet Development Board
- It supports both the Atmel AVR processor and several versions of the 8051. Currently there are no drivers for the 8051 or reliable ISP support, hopefully this will be forthcomming. -
Added: 12-Nov-2003
Hits : 48 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
AVR570
- The AVR570 is a 47mm square module holding a surface mounted ATmega128 CPU, and its associated components, eg. the crystal, capacitors, reset generator, ISP programming connector, and an optional 10-pin ICE connector. -
Added: 25-Aug-2003
Hits : 62 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
AVRcard mega128
- The AVR CARD is an ATmega128 8-bit RISC processor based prototyping board. -
Added: 25-Aug-2003
Hits : 71 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
CANDIP/AVR1
- CANDIP/AVR1 is a small microcontroller board which inclused a AT90S8515, Philips SJA1000 CAN controller, RS232 tranceiver, MAX825M Reset circuit and a 82C250 CAN tranceiver. -
Added: 25-Aug-2003
Hits : 25 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
CANDIP/AVR1M
- CANDIP/AVR1M is a small microcontroller board which includes an ATMega161, a Philips SJA1000 CAN controller, RS232 tranceiver, MAX825M Reset circuit and a 82C250 CAN tranceiver. -
Added: 25-Aug-2003
Hits : 11 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
CANDIP/ST2
- CANDIP/ST2 is a starterkit for CAN & AVR including 2 each of the CANDIP/AVR and 2 each of the ACB1/1 Activity board, CAN cable, RS232 cable, AC/DC adapter and soure code in ICCAVR, CodeVision and BASCOM to demonstrate how to send/receive CAN frames both in Basic mode and in PeliCAN mode. -
Added: 25-Aug-2003
Hits : 9 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
Crumb128
- Tiny low-cost rapid protoyping module with standard pin headers for the Atmel AVR ATmega128 microcontroller. Fully featured on just 40x30mm²! (~40,- Euro) -
Added: 8-Apr-2004
Hits : 39 Rating : 
(1.00) Votes : 1
[
Rate It
]
-
DelphiStamp using ATMega128
- Small footprint developmentboard with Delphi / Pascal compatible compiler, simulator and IDE. Contains RS232 and RS485 drivers, led's, BIOS and regulated power supply -
Added: 6-Oct-2005
Hits : 3 Rating : No Rating (0) Votes : 0
[
Rate It
]
-
DEV 103
- The test board serves as the base circuit board for fast and economical entry into the development and series production of your applications which are based on µCM103 modules. This base circuit board contains many mechanical and electrical components for a quick line-up of µCM103. -
Added: 25-Aug-2003
Hits : 25 Rating : No Rating (0) Votes : 0
[
Rate It
]
Prev 10
Next 10
(c) 2000-2003 Stelios Koroneos
